SanDisk Data Recovery Services

Need your data recovered from a SanDisk drive? We’ve recovered data from SanDisk USB flash drives and memory cards since 2007, with a 98% success rate and no data, no charge policy. If we can’t recover your files, you don’t pay for the recovery. Every case is handled in our own component-level lab — not outsourced — and you verify your recovered files before you pay. We also recover other major brands, including Samsung flash drives.

Most SanDisk data loss falls into one of four categories.

Broken or snapped USB connector

• The most common failure we see, notably in the Cruzer SDCZ48, SDCZ50, and SDCZ60 series use a connector design that fatigues and cracks with everyday plugging and unplugging. If the drive wobbles in the port, is intermittently detected, or has physically snapped, the memory itself is usually fine, it’s the connection that’s broken and is almost always recoverable.

Dead or failed controller

• When the controller chip that manages the drive fails, the drive may not power on or appear at all. We can replace the controller or read the raw NAND memory directly and rebuild the data using the drive’s specific addressing scheme.

Corrupted or RAW file system / accidental format

• The drive is detected but the file system is unreadable, RAW, or was accidentally formatted. As long as the flash memory is healthy and hasn’t been overwritten, the original data is typically still present in the flash memory chip.

Water, fire, or physical damage

• Liquid or impact damage sounds fatal but often isn’t. If the NAND memory survived, we can recover it even when the rest of the drive is destroyed by reading the physical flash memory chip.

Snapped your SanDisk Cruzer Blade? Your data is almost always still recoverable. The Cruzer Blade’s slim plastic housing makes it one of the most common SanDisk drives to snap at the USB connector — usually where the metal plug meets the circuit board. In nearly every case the flash memory that holds your files is undamaged: the break is mechanical, not electronic.

What we do with a broken Cruzer Blade

• Connector bent or torn loose — if the solder pads are intact, we re-solder it and read the drive normally.
• Pads or traces lifted — we transplant the memory to a donor board or read the NAND chip directly (chip-off).
• Board snapped through — even a drive broken in two is usually recoverable; the memory chip survives the break.

Don’t keep plugging it in. Forcing a loose connector back into a port can short the board and turn a simple repair into a much harder recovery. Send it to us — diagnosis is free and it’s no data, no charge.

Before sending anything in, a few safe checks are worth a minute:

1. Try a different USB port and a different computer. Rule out a bad port or cable.
2. Do not reformat the drive, even if Windows or macOS prompts you to. Formatting makes recovery harder.
3. Stop using the drive. Don’t save new files to it or run repair utilities that write to it.
4. If files are simply deleted (drive still works normally), reputable recovery software may retrieve them.

When to stop: if the drive isn’t recognized, shows 0 bytes, asks to be formatted, makes no difference across ports, or is physically damaged,
stop now. Continued use or DIY tools that write to a failing drive can overwrite your data permanently. At that point it’s a hardware recovery — send it in for a free evaluation.

We’ve made professional recovery simple and risk-free:

1. Submit your case online and print a free prepaid shipping label.
2. Free diagnostic. We evaluate your SanDisk drive and give you a quote.
3. You approve. Nothing proceeds until you say go.
4. We recover your data in our in-house lab using the methods above.
5. You verify your files before you pay. We show you a list of recovered files so you know exactly what came back.
6. Secure return. You download your recovered data from our secure server or we copy the data onto another flash drive and mail it back for an additional fee.

No data, no charge. If we can’t recover your files, you owe nothing for the recovery.

We just finished up a SanDisk Ultra Flair SDCZ75-1T00-G46 — a full 1TB USB flash drive — and as far as I know it’s the first 1TB SanDisk we’ve ever had on the bench. The drive came in unreadable after a failed transfer, Windows wanted to format it, and the controller was alive but the NAND was throwing read errors. Read More: SanDisk Ultra Flair 1TB (SDCZ75-1T00-G46)

A customer contacted us after their SanDisk Ultra USB 3.0 512GB flash drive (model SDCZ48-512G-G46) became completely unresponsive. With the 20-82-00388-A1 controller, the circuit board and controller are extremely sensitive to voltage changes. Unlike many other flash drive controllers that can tolerate minor fluctuations in USB power delivery, this design has very tight voltage tolerances. Even the slightest overvoltage event — which can occur from a faulty USB port, a bad hub, a power surge, or even plugging into certain docking stations — can damage sensitive components on the board. Read More: SanDisk Ultra 3.0 SDCZ48-512G Data Recovery

We use flat-rate, upfront pricing — you’ll know the full cost before any work begins, and there are no hidden fees. Typical SanDisk recoveries fall in the $350 – $900 range depending on the failure type (a corrupted file system costs less than a monolithic chip-off recovery). Your exact price is confirmed with your free diagnostic, and you only pay if we recover your data.

• Since 2007 — nearly two decades specializing in flash media, not a general repair shop
• In-house component-level lab — nothing is outsourced or shipped to a third party
• 98% success rate, including cases other labs decline
• 5.0★ from 150+ verified Google reviews
• A real US facility in Bridgeport, CT — not a PO box
• No data, no charge, with file verification before you pay